Get A Quote
Let’s Get in Touch
Create an account with our website to receive the personalized offers about our products.
Blog
January 11, 2022
The main cutting edge of the END MILLS is on the cylindrical surface and the cutting edge on the end face is the secondary cutting edge.
January 11, 2022
CN CNC TOOLS are focus on Produce Lathe Collet/ Guide Bush/ Bar Feeder/ Sleeve etc for more than 10 years.
January 11, 2022
According to the requirements of the equipment and the material to be processed select the matching S-drill and cutting parameters.
January 11, 2022
CVD can be coated with TiCN, which has excellent wear resistance, and Al2O3, a thick film with very good heat resistance, and therefore shows long life in high speed,
December 22, 2021
Most people choose to buy their CNC tools from the brands Iscar, Taegutec, Korloy. Many of them have also tried some other brands of tools but with very poor results. Time is money, so most people still choose to buy from these brands.
December 22, 2021
CN CNC TOOLS has been producing Carbide Inserts for turning, milling, grooving and threading for almost 5 years or more.
December 22, 2021
General turning tools holders are classified according to the type of clamping, in the form of Class D clamping, lever clamping, screw clamping, platen clamping and compound clamping.
December 22, 2021
According to the chemical composition of the steel can be divided into two categories: carbon steel and alloy steel.
December 22, 2021
The main uses of milling cutters.Flat milling cutters for rough milling, removal of large quantities of blanks, finishing of small horizontal planes or contours.
- 1
- 2